Call of Duty Ghosts for Dummies – Part One
With the CoD World League coming to an end with the World Championship there’s not much to do aside from wait for WWII. However, the professionals have turned to Call of Duty Ghosts, the competitive title from 2013-2014 in preparation for boots on the ground. With the rate at which esports are growing it’s needless to say that Call of Duty will have gained many new viewers over the past few years. If you never played Ghosts in its heyday and are interested in picking up a copy, here are a few tips for when you get started.
Starting with Assault Rifles, in which only one is used consistently, the Remington R5. Its high damage and low recoil make it the go to. The weapon’s only downfall is its low fire rate. Despite this, none of the other rifles can match it’s time to kill with the R5 consistently killing in three bullets.At one point the professionals dabbled with the FAD. Due to its high fire rate and low recoil, it was tested as an alternative to the R5 on some of the shorter range maps. It was relatively unsuccessful since the low AR movement speed in Ghosts meant that it couldn’t compete with the Sub-Machine guns at medium range and was bested by the consistency of the R5 at long range. However, it is still an option if you aren’t a fan of the R5.
The most common attachments on Assault Rifles are Red Dot paired with Foregrip. The Red Dot is to free your eyes of the awkward iron sights. Meanwhile, the Foregrip simply improves accuracy slightly. On some of the longer range maps such as Octane, pros have been known to use Muzzle Brake as opposed to the Foregrip in order to keep the damage across longer sight lines.
Another popular attachment is the Thermal Hybrid Scope. It is used for its ability to more easily spot out enemies through heat signatures with the ability to switch back to a normal red dot. Giving you the best of both worlds but beware. Enemies can use the perk Incog so they become immune to thermal scopes making them very hard to spot.
Sub-Machine GunsBy far the best gun in the game, the Vector CRB is the most common gun in CoD Ghosts. It’s high damage and fairly high fire rate means it more often than not kills in two bullets. Paired with a Foregrip and Muzzle Brake the Vector’s damage range is extended. Making it all the more deadly.
However, the Vector only became the best gun about two-thirds into Ghosts’ cycle. Before that, the MTAR-X was the most popular choice. The sub handles like an Assault Rifle with SMG movement speed. It’s fair time to kill means that some professionals stuck with it even after the Vector buff. It remains a good choice on maps like Warhawk and Octane where there are more medium—long range gunfights meaning the MTAR can best the Vector with its AR handling.
Popular attachments for sub-machine guns are Foregrip and Muzzle Brake. This is to extend their damage range whilst improving the already strong accuracy of the MTAR and Vector. Some pros prefer to use a red dot on the Vector. In my opinion, it’s personal preference as the Vector is already so strong you can clear up your vision by using it.
Sniper Rifles and Shotguns
That leaves us with the aforementioned, considering just about everything else is banned. There are two main snipers used which are the USR and L115. The USR has a slightly higher movement speed and handling than the L115 which makes it a good choice if you want to rush for first blood. However, it has lower damage meaning it gets more hit markers than its counterpart. While the L115 still gets hit markers from the knee down, it is a more consistent killing machine making it the more common option. Equipped with your sniper you might like to use the thermal scope to more easily spot out enemies.The most overpowered shotgun, the Bulldog, got banned halfway through Ghosts. More cunning pros tried out the pump-action shotgun, the FP6. While it wasn’t as potent as its predecessor it is still an annoying way to catch your enemies off guard. I find it particularly useful when defending the B bomb site on Sovereign.
For the sake of this article, I will just be looking at the maps used in Search and Destroy. Those maps being Octane, Freight, Sovereign and Warhawk.
I’ll start on the defensive side of Octane, which can be quite a challenge. How I like my team to setup is with two players holding the cross to the defender’s side of the map. You can have a player watching mid from the tank outside diner and one holding bottom broken. This frees up a player to play top pawn where they can repeatedly peek B bomb until they spot someone with the last player being free to roam. The fourth could rush motel or the B domination flag to get more map control. Or he could hold gas station to help the broken player if he gets rushed. If someone is spotted on the bomb from pawn then you can hurl a few grenades at them in an attempt to kill the bomb planter.
The attacking side is much harder since you only really have access to the B bombsite. A lot of players like to run smokes with Incog and try to get a fast plant. This is effective as the Remington players holding the likes of pawn and broken will struggle in motel’s close quarters. Other teams may rather hold to see if a guy rushes into the motel and pick him off before planting or doing everything possible to kill the player top pawn before they plant. This could be through grenades or sniping. There is also an explosive gas pipe which can be shot which can sometimes kill the player.
As aforementioned getting to A is a challenge. Sometimes teams go on an all-out rush to broken from the start of the round. Personally, I like to have a guy try to snipe the player pawn while the rest of the team rushes and tries to kill anyone playing broken. Another way is to play B as normal, kill the pawn player before rotating back and trying to cross again. As you can tell by now the pawn player is very crucial to the round as he has the most vision and can feed information to the rest of his team. With him dead it is much easier to cross to A as the only player that could spot it after that is the broken player, if he’s still there.
Defending on Freight normally involves heavily stacking towards the A bombsite. Since the attackers can only access B by crossing the train tracks or by breaking the underground gate, which makes a loud noise, it makes sense to focus your efforts on A.
If you catch the enemy crossing onto the bomb then it should be a free kill for someone playing in red. Players one and two should focus on holding red and the area between it and the bomb. Looking at the diagram I believe these are the optimal positions to play. All player one has to do is watch the main entrance to red. Meanwhile, player two can see the jump from the train into red, logs and B domination.
Player three should play in the Owens building and attempt to spot out the attacking assault rifle players. The emphasis should be on getting information for the team as opposed to getting a kill. Staying alive is more important as the Owens player stops players crossing from white to B bomb. Player four is free to roam, however, I believe he is best spent helping watch the cross. He can rush the electric box near the white train to see the entire cross or hold bottom Owens getting information from B domination and storage containers.
If the attackers do try to rush underground the bottom Owens player can watch if anyone pushes front while player three can watch the cross onto bomb from the second floor.
As you can tell attackers have a hard time on Freight. The most successful plays are usually explosive ones such as a double push red where you bait the first guy in to kill the red player. This is a favourable trade for attackers since red is such a pivotal point on the map. Similarly to Octane, you could try the smoke Incog rush onto bomb then your ARs can watch the defuse from Porter or White.
One unique strategy is leaving an assault rifle to get a pick from in base while three of you stack underground. Wait for the AR to hopefully make a kill then explode out of underground. This generates confusion since the AR will kill someone from spawn to A then all of a sudden the gate is broken. The defenders have to worry about being pinched while the main attackers focus on getting the bomb down.
Obviously, take these strategies with a pinch of salt. They are basic and mostly intended for newer players but it’s definitely a good starting point for anyone looking to incorporate more team play. Since this article is getting long, I’ll finish the remainder of the maps in Monday’s article. My paint skills aren’t great but if you find the diagrams helpful then I can make more. If there are other things you think I should bring up don’t hesitate to comment.
You can ‘Like’ The Game Haus on Facebook and ‘Follow’ us on Twitter for more sports and esports articles. You can find me on Twitter at @JackWrightIGL. Feature image courtesy of callofduty.wikia, map layouts sourced from unofficialcallofduty.com